Configuración: Punto a Punto con Ubiquiti Nanostation M2

Publicado por D3M0N, 17 de Junio de 2012, 03:07:27 AM

Tema anterior - Siguiente tema

0 Miembros y 1 Visitante están viendo este tema.

D3M0N

You are not allowed to view links. Register or Login

Bien, hoy les traigo unos simples pasos para configurar dos equipos Ubiquiti Nanostation M2 como Punto a Punto (Base/Remoto):

Primero antes de comenzar debemos tener la versión v5.5 de AirOS, para no tener ningún tipo de problema, la podemos descargar de: You are not allowed to view links. Register or Login

una ves que tengamos actualizados los dos equipos, vamos a configurar el BASE, lo que vamos a hacer principalmente es Habilitar el AirMAX y configurarlo como HIGH:

You are not allowed to view links. Register or Login

Luego vamos a ir a la Pestaña "Wireless" y Configuraremos:

You are not allowed to view links. Register or Login

1.- Punto de Acceso
2.- WDS
3.- Un nombre para la RED.
4.- Esconder Nombre de la red.
5.- 40MHz
6.- Cambio de Canal deshabilitado.
7.- Frecuencia Automática.
8.- Lista de Frecuencias Habilitada.
9.- Seleccionamos un Canal no utilizado en la zona.
10.- 28dBm de potencia de salida.
11.- TX Maximo MCS 15-300.
12.- Cifrado WPA2-AES
13.- Autentificación PSK
14.- Una contraseña.
15.- Filtro de MAC, de ser necesario se habilita y se agrega la MAC Address del REMOTO.
16.- Cambiar... Aplicar...

Luego vamos a ir a la pestaña "Advanced" y vamos a configurar tal cual se ve en la imagen, pueda que no haya que cambiar nada.

You are not allowed to view links. Register or Login

Bien, por ultimo podemos ir a la pestaña "System" y darle el nombre de "BASE", y ya tendríamos configurado el primer Punto.




Ahora continuaremos con el segundo punto (REMOTO), lo primero que configuraremos sera el AirMAX:

You are not allowed to view links. Register or Login

Luego vamos a ir a la pestaña "Wireless" y vamos a configurar:

You are not allowed to view links. Register or Login

1.- Estacion.
2.- WDS.
3.- El nombre de la RED.
4.- La MAC Address del BASE.
5.- 20/40MHz
6.- Cambio de canal deshabilitado.
7.- Lista de Frecuencias habilitada.
8.- Frecuencia igual al BASE.
9.- 28dBm de potencia de salida.
10.- TX Maximo MCS 15-300.
11.- Cifrado WPA2-AES.
12.- Autentificación PSK.
13.- La Clave configurada en el BASE.
14.- Cambiar... Aplicar..

Luego vamos a la pestaña "Services" y allí configuraremos:

You are not allowed to view links. Register or Login

1.- Enable
2.- Una IP
3.- Cambiar... Aplicar...

Luego vamos a ir a la pestaña "Network" y configuraremos una IP diferente al BASE:

You are not allowed to view links. Register or Login

Bien, por ultimo podemos ir a la pestaña "System" y darle el nombre de "REMOTO", y ya tendríamos configurado el segundo punto.

Ahora simplemente debemos colocarlos a una distancia máxima de 7km con linea de vista.

D3M0N

#1
Preconfigs:

PAP-NOMBRERED-192.168.1.20-BASE.cfg
aaa.1.status=enabled
radio.1.polling_fh_announce_cnt=10
radio.1.polling_fh_time=3000
radio.1.polling_fh=0
aaa.1.radius.macacl.status=disabled
aaa.1.radius.acct.1.status=disabled
aaa.1.radius.auth.1.status=disabled
aaa.1.wpa.key.1.mgmt=WPA-PSK
aaa.1.ssid=NOMBRERED
aaa.1.br.devname=br0
aaa.1.devname=ath0
aaa.1.driver=madwifi
aaa.1.wpa.1.pairwise=CCMP
aaa.1.wpa.mode=2
wireless.1.mac_acl.policy=allow
wireless.1.mac_acl.status=disabled
wireless.1.wds.6.peer=
wireless.1.wds.5.peer=
wireless.1.wds.4.peer=
wireless.1.wds.3.peer=
wireless.1.wds.2.peer=
wireless.1.wds.1.peer=
wireless.1.autowds=disabled
radio.1.freq=0
wpasupplicant.status=disabled
wpasupplicant.profile.1.network.1.ssid=NOMBRERED
wpasupplicant.profile.1.network.1.psk=NOMBRERED
wpasupplicant.profile.1.network.1.proto.1.name=WPA
wpasupplicant.profile.1.network.1.pairwise.1.name=CCMP
wpasupplicant.profile.1.network.1.key_mgmt.1.name=WPA-PSK
wpasupplicant.profile.1.network.1.eap.1.status=disabled
wpasupplicant.profile.1.network.1.bssid=
wpasupplicant.profile.1.name=WPA-PSK
wpasupplicant.device.1.status=disabled
wpasupplicant.device.1.profile=WPA-PSK
wpasupplicant.device.1.driver=madwifi
wpasupplicant.device.1.devname=ath0
wireless.status=enabled
wireless.1.wds.status=enabled
wireless.1.status=enabled
wireless.1.ssid=NOMBRERED
wireless.1.security.type=none
wireless.1.scan_list.status=enabled
wireless.1.scan_list.channels=2462
wireless.1.macclone=disabled
wireless.1.hide_ssid=enabled
wireless.1.devname=ath0
wireless.1.authmode=1
wireless.1.ap=
wireless.1.addmtikie=enabled
users.status=enabled
users.2.status=disabled
users.1.status=enabled
users.1.password=VvpvCwhccFv6Q
users.1.name=ubnt
update.check.status=enabled
telnetd.status=enabled
telnetd.port=23
system.timezone=GMT+3
system.longitude=-58.540955
system.latitude=-34.551453
system.eirp.status=disabled
system.date.timestamp=061700002012
system.date.status=enabled
system.cfg.version=65539
system.button.reset=enabled
syslog.status=enabled
syslog.remote.status=
sshd.status=enabled
sshd.port=22
sshd.auth.passwd=enabled
snmp.status=disabled
route.status=enabled
route.1.status=enabled
route.1.netmask=0
route.1.ip=0.0.0.0
route.1.gateway=192.168.1.1
route.1.devname=br0
resolv.host.1.status=enabled
resolv.host.1.name=BASE
radio.status=enabled
radio.countrycode=840
radio.1.txpower=28
radio.1.subsystemid=0xe012
radio.1.status=enabled
radio.1.reg_obey=enabled
radio.1.rate.mcs=15
radio.1.rate.auto=enabled
radio.1.pollingpri=0
radio.1.pollingnoack=
radio.1.polling=enabled
radio.1.obey=enabled
radio.1.mode=master
radio.1.mcastrate=
radio.1.low_txpower_mode=disabled
radio.1.ieee_mode=11nght40
radio.1.forbiasauto=1
radio.1.dfs.status=enabled
radio.1.devname=ath0
radio.1.cwm.mode=2
radio.1.cwm.enable=0
radio.1.countrycode=840
radio.1.clksel=1
radio.1.chanshift=0
radio.1.chanbw=0
radio.1.antenna.id=4
radio.1.acktimeout=23
radio.1.ackdistance=300
radio.1.ack.auto=enabled
pwdog.status=disabled
ntpclient.status=disabled
netmode=bridge
netconf.status=enabled
netconf.4.up=enabled
netconf.4.status=enabled
netconf.4.promisc=enabled
netconf.4.netmask=255.255.255.0
netconf.4.ip=0.0.0.0
netconf.4.devname=eth1
netconf.3.up=enabled
netconf.3.status=enabled
netconf.3.role=mlan
netconf.3.netmask=255.255.255.0
netconf.3.ip=192.168.1.20
netconf.3.devname=br0
netconf.2.up=enabled
netconf.2.status=enabled
netconf.2.promisc=enabled
netconf.2.netmask=255.255.255.0
netconf.2.ip=0.0.0.0
netconf.2.devname=ath0
netconf.2.allmulti=enabled
netconf.1.up=enabled
netconf.1.status=enabled
netconf.1.promisc=enabled
netconf.1.netmask=255.255.255.0
netconf.1.ip=0.0.0.0
netconf.1.devname=eth0
httpd.status=enabled
httpd.session.timeout=900
httpd.port=80
httpd.https.status=disabled
gui.language=sp_SP
ebtables.sys.status=enabled
ebtables.sys.eap.status=enabled
ebtables.sys.eap.1.status=enabled
ebtables.sys.eap.1.devname=ath0
ebtables.sys.arpnat.status=disabled
ebtables.sys.arpnat.1.status=enabled
ebtables.sys.arpnat.1.devname=ath0
ebtables.status=enabled
dyndns.status=disabled
discovery.status=enabled
discovery.cdp.status=enabled
dhcpd.status=disabled
dhcpd.1.status=disabled
dhcpc.status=disabled
dhcpc.1.status=enabled
dhcpc.1.devname=br0
bridge.status=enabled
bridge.1.port.3.devname=eth1
bridge.1.port.2.devname=ath0
bridge.1.port.1.devname=eth0
bridge.1.fd=1
bridge.1.devname=br0
aaa.status=enabled
aaa.1.wpa.psk=NOMBRERED
airview.tcp_port=18888
radio.1.airsync.status=disabled
radio.1.airsync.mode=
radio.1.airsync.port=
radio.1.airsync.ip=
radio.1.airsync.slot.override=disabled
radio.1.airsync.slot.up=
radio.1.airsync.slot.down=
wireless.1.wmm=enabled
wireless.1.wmmlevel=
radio.1.rts=off
wireless.1.fastframes=0
wireless.1.frameburst=0
wireless.1.compression=0
wireless.1.signal_led_status=enabled
wireless.1.signal_led1=94
wireless.1.signal_led2=80
wireless.1.signal_led3=73
wireless.1.signal_led4=65
radio.1.ampdu.frames=32
radio.1.ampdu.bytes=50000
radio.1.ampdu.status=enabled
gpio.status=enabled
gpio.1.status=enabled
gpio.1.line=8
gpio.1.direction=1
gpio.1.value=disabled
netconf.1.autoneg=enabled
netconf.4.autoneg=enabled
wireless.1.l2_isolation=disabled
radio.1.thresh62a=
radio.1.thresh62b=
radio.1.thresh62g=
wireless.1.sens=0


PAP-NOMBRERED-192.168.1.21-REMOTO.cfg
aaa.1.status=disabled
aaa.1.wpa.psk=NOMBRERED
aaa.1.wpa.mode=2
aaa.1.wpa.1.pairwise=CCMP
aaa.1.wpa.key.1.mgmt=WPA-PSK
aaa.1.driver=madwifi
aaa.1.devname=ath0
aaa.1.br.devname=br0
aaa.1.ssid=NOMBRERED
aaa.1.radius.auth.1.status=disabled
aaa.1.radius.acct.1.status=disabled
aaa.1.radius.macacl.status=disabled
aaa.status=disabled
pwdog.period=300
pwdog.delay=300
pwdog.retry=3
pwdog.host=192.168.2.100
pwdog.status=enabled
wireless.1.sens=0
wireless.1.l2_isolation=disabled
wireless.1.signal_led4=65
wireless.1.signal_led3=73
wireless.1.signal_led2=80
wireless.1.signal_led1=94
wireless.1.signal_led_status=enabled
wireless.1.compression=0
wireless.1.frameburst=0
wireless.1.fastframes=0
wireless.1.wmmlevel=
wireless.1.wmm=enabled
wireless.1.addmtikie=enabled
wireless.1.ap=00:15:6D:7C:E7:63
wireless.1.authmode=1
wireless.1.devname=ath0
wireless.1.hide_ssid=disabled
wireless.1.scan_list.channels=2462
wireless.1.scan_list.status=enabled
wireless.1.security.type=none
wireless.1.ssid=La[El Usuario ha Insultado]DelPato
wireless.1.status=enabled
wireless.1.wds.status=enabled
wireless.1.wds.1.peer=
wireless.1.wds.2.peer=
wireless.1.wds.3.peer=
wireless.1.wds.4.peer=
wireless.1.wds.5.peer=
wireless.1.wds.6.peer=
wireless.1.autowds=disabled
wireless.1.mac_acl.status=disabled
wireless.1.mac_acl.policy=allow
wireless.status=enabled
radio.1.thresh62g=
radio.1.thresh62b=
radio.1.thresh62a=
radio.1.ampdu.status=enabled
radio.1.ampdu.bytes=50000
radio.1.ampdu.frames=32
radio.1.rts=off
radio.1.airsync.slot.down=
radio.1.airsync.slot.up=
radio.1.airsync.slot.override=disabled
radio.1.airsync.ip=
radio.1.airsync.port=
radio.1.airsync.mode=
radio.1.airsync.status=disabled
radio.1.ack.auto=enabled
radio.1.ackdistance=300
radio.1.acktimeout=23
radio.1.antenna.id=4
radio.1.chanbw=0
radio.1.chanshift=0
radio.1.clksel=1
radio.1.countrycode=840
radio.1.cwm.enable=0
radio.1.cwm.mode=1
radio.1.devname=ath0
radio.1.dfs.status=enabled
radio.1.forbiasauto=1
radio.1.ieee_mode=11nght40
radio.1.low_txpower_mode=disabled
radio.1.mcastrate=15
radio.1.mode=managed
radio.1.obey=enabled
radio.1.polling=enabled
radio.1.pollingnoack=
radio.1.pollingpri=0
radio.1.rate.auto=enabled
radio.1.rate.mcs=15
radio.1.reg_obey=enabled
radio.1.status=enabled
radio.1.subsystemid=0xe012
radio.1.txpower=28
radio.1.freq=0
radio.1.polling_fh=0
radio.1.polling_fh_time=3000
radio.1.polling_fh_announce_cnt=10
radio.countrycode=840
radio.status=enabled
netconf.status=enabled
netconf.1.status=enabled
netconf.1.devname=eth0
netconf.1.mtu=1500
netconf.1.role=bridge_port
netconf.1.autoip.status=disabled
netconf.1.hwaddr.status=disabled
netconf.1.hwaddr.mac=
netconf.1.autoneg=enabled
netconf.1.ip=0.0.0.0
netconf.1.netmask=255.255.255.0
netconf.1.promisc=enabled
netconf.1.up=enabled
netconf.2.status=enabled
netconf.2.devname=ath0
netconf.2.mtu=1500
netconf.2.role=bridge_port
netconf.2.autoip.status=disabled
netconf.2.hwaddr.status=disabled
netconf.2.hwaddr.mac=
netconf.2.allmulti=enabled
netconf.2.ip=0.0.0.0
netconf.2.netmask=255.255.255.0
netconf.2.promisc=enabled
netconf.2.up=enabled
netconf.3.status=enabled
netconf.3.devname=br0
netconf.3.mtu=1500
netconf.3.role=mlan
netconf.3.autoip.status=disabled
netconf.3.hwaddr.status=disabled
netconf.3.hwaddr.mac=
netconf.3.ip=192.168.1.21
netconf.3.netmask=255.255.255.0
netconf.3.up=enabled
netconf.4.status=enabled
netconf.4.devname=eth1
netconf.4.mtu=1500
netconf.4.role=bridge_port
netconf.4.autoip.status=disabled
netconf.4.hwaddr.status=disabled
netconf.4.hwaddr.mac=
netconf.4.autoneg=enabled
netconf.4.ip=0.0.0.0
netconf.4.netmask=255.255.255.0
netconf.4.promisc=enabled
netconf.4.up=enabled
gpio.1.value=disabled
gpio.1.direction=1
gpio.1.line=8
gpio.1.status=enabled
gpio.status=enabled
airview.tcp_port=18888
bridge.status=enabled
bridge.1.status=enabled
bridge.1.devname=br0
bridge.1.stp.status=disabled
bridge.1.port.1.status=enabled
bridge.1.port.1.devname=eth0
bridge.1.port.2.status=enabled
bridge.1.port.2.devname=ath0
bridge.1.port.3.status=enabled
bridge.1.port.3.devname=eth1
bridge.1.fd=1
dhcpc.status=disabled
dhcpc.1.devname=br0
dhcpc.1.status=disabled
dhcpd.status=disabled
discovery.cdp.status=enabled
discovery.status=enabled
dyndns.status=disabled
ebtables.status=enabled
ebtables.sys.arpnat.1.devname=ath0
ebtables.sys.arpnat.1.status=enabled
ebtables.sys.arpnat.status=disabled
ebtables.sys.eap.1.devname=ath0
ebtables.sys.eap.1.status=enabled
ebtables.sys.eap.status=enabled
ebtables.sys.status=enabled
gui.language=sp_SP
httpd.https.status=disabled
httpd.port=80
httpd.session.timeout=900
httpd.status=enabled
netmode=bridge
ntpclient.status=disabled
resolv.status=disabled
resolv.host.1.name=REMOTO
resolv.host.1.status=enabled
resolv.nameserver.1.ip=
resolv.nameserver.1.status=disabled
resolv.nameserver.2.ip=
resolv.nameserver.2.status=disabled
resolv.nameserver.status=enabled
route.status=enabled
route.1.ip=0.0.0.0
route.1.netmask=0
route.1.gateway=192.168.1.1
route.1.comment=
route.1.status=enabled
route.1.devname=br0
snmp.status=disabled
sshd.auth.passwd=enabled
sshd.port=22
sshd.status=enabled
syslog.remote.status=
syslog.status=enabled
system.button.reset=enabled
system.cfg.version=65539
system.date.status=enabled
system.date.timestamp=061700002012
system.eirp.status=disabled
system.latitude=
system.longitude=
system.timezone=GMT+3
telnetd.port=23
telnetd.status=enabled
update.check.status=enabled
users.1.name=ubnt
users.1.password=VvpvCwhccFv6Q
users.1.status=enabled
users.2.status=disabled
users.status=enabled
wpasupplicant.device.1.devname=ath0
wpasupplicant.device.1.driver=madwifi
wpasupplicant.device.1.profile=WPA-PSK
wpasupplicant.device.1.status=enabled
wpasupplicant.profile.1.name=WPA-PSK
wpasupplicant.profile.1.network.1.bssid=00:15:6D:7C:E7:63
wpasupplicant.profile.1.network.1.eap.1.status=disabled
wpasupplicant.profile.1.network.1.key_mgmt.1.name=WPA-PSK
wpasupplicant.profile.1.network.1.pairwise.1.name=CCMP
wpasupplicant.profile.1.network.1.proto.1.name=RSN
wpasupplicant.profile.1.network.1.psk=NOMBRERED
wpasupplicant.profile.1.network.1.ssid=NOMBRERED
wpasupplicant.status=enabled
ppp.status=disabled
vlan.status=disabled


DATOS:
RED: NOMBRERED
PASS: NOMBRERED

D3M0N

Enlaces Punto a Punto con Equipamiento Ubiquiti:

Ubiquiti Nano Loco M2/M5: 3Km
Ubiquiti Nanostation M2/M5: 7Km
Ubiquiti NanoBridge M2/M5: 15Km
Ubiquiti AirGrid M2/M5: 30Km