Configuración: Punto a Punto con Ubiquiti Nanostation M2

[D3M0N]

You are not allowed to view links. Register or Login

Bien, hoy les traigo unos simples pasos para configurar dos equipos Ubiquiti Nanostation M2 como Punto a Punto (Base/Remoto):

Primero antes de comenzar debemos tener la versión v5.5 de AirOS, para no tener ningún tipo de problema, la podemos descargar de: You are not allowed to view links. Register or Login

una ves que tengamos actualizados los dos equipos, vamos a configurar el BASE, lo que vamos a hacer principalmente es Habilitar el AirMAX y configurarlo como HIGH:

You are not allowed to view links. Register or Login

Luego vamos a ir a la Pestaña "Wireless" y Configuraremos:

You are not allowed to view links. Register or Login

1.- Punto de Acceso
2.- WDS
3.- Un nombre para la RED.
4.- Esconder Nombre de la red.
5.- 40MHz
6.- Cambio de Canal deshabilitado.
7.- Frecuencia Automática.
8.- Lista de Frecuencias Habilitada.
9.- Seleccionamos un Canal no utilizado en la zona.
10.- 28dBm de potencia de salida.
11.- TX Maximo MCS 15-300.
12.- Cifrado WPA2-AES
13.- Autentificación PSK
14.- Una contraseña.
15.- Filtro de MAC, de ser necesario se habilita y se agrega la MAC Address del REMOTO.
16.- Cambiar... Aplicar...

Luego vamos a ir a la pestaña "Advanced" y vamos a configurar tal cual se ve en la imagen, pueda que no haya que cambiar nada.

You are not allowed to view links. Register or Login

Bien, por ultimo podemos ir a la pestaña "System" y darle el nombre de "BASE", y ya tendríamos configurado el primer Punto.



Ahora continuaremos con el segundo punto (REMOTO), lo primero que configuraremos sera el AirMAX:

You are not allowed to view links. Register or Login

Luego vamos a ir a la pestaña "Wireless" y vamos a configurar:

You are not allowed to view links. Register or Login

1.- Estacion.
2.- WDS.
3.- El nombre de la RED.
4.- La MAC Address del BASE.
5.- 20/40MHz
6.- Cambio de canal deshabilitado.
7.- Lista de Frecuencias habilitada.
8.- Frecuencia igual al BASE.
9.- 28dBm de potencia de salida.
10.- TX Maximo MCS 15-300.
11.- Cifrado WPA2-AES.
12.- Autentificación PSK.
13.- La Clave configurada en el BASE.
14.- Cambiar... Aplicar..

Luego vamos a la pestaña "Services" y allí configuraremos:

You are not allowed to view links. Register or Login

1.- Enable
2.- Una IP
3.- Cambiar... Aplicar...

Luego vamos a ir a la pestaña "Network" y configuraremos una IP diferente al BASE:

You are not allowed to view links. Register or Login

Bien, por ultimo podemos ir a la pestaña "System" y darle el nombre de "REMOTO", y ya tendríamos configurado el segundo punto.

Ahora simplemente debemos colocarlos a una distancia máxima de 7km con linea de vista.

[D3M0N]

Preconfigs:

PAP-NOMBRERED-192.168.1.20-BASE.cfg

Código: php

aaa.1.status=enabled
radio.1.polling_fh_announce_cnt=10
radio.1.polling_fh_time=3000
radio.1.polling_fh=0
aaa.1.radius.macacl.status=disabled
aaa.1.radius.acct.1.status=disabled
aaa.1.radius.auth.1.status=disabled
aaa.1.wpa.key.1.mgmt=WPA-PSK
aaa.1.ssid=NOMBRERED
aaa.1.br.devname=br0
aaa.1.devname=ath0
aaa.1.driver=madwifi
aaa.1.wpa.1.pairwise=CCMP
aaa.1.wpa.mode=2
wireless.1.mac_acl.policy=allow
wireless.1.mac_acl.status=disabled
wireless.1.wds.6.peer=
wireless.1.wds.5.peer=
wireless.1.wds.4.peer=
wireless.1.wds.3.peer=
wireless.1.wds.2.peer=
wireless.1.wds.1.peer=
wireless.1.autowds=disabled
radio.1.freq=0
wpasupplicant.status=disabled
wpasupplicant.profile.1.network.1.ssid=NOMBRERED
wpasupplicant.profile.1.network.1.psk=NOMBRERED
wpasupplicant.profile.1.network.1.proto.1.name=WPA
wpasupplicant.profile.1.network.1.pairwise.1.name=CCMP
wpasupplicant.profile.1.network.1.key_mgmt.1.name=WPA-PSK
wpasupplicant.profile.1.network.1.eap.1.status=disabled
wpasupplicant.profile.1.network.1.bssid=
wpasupplicant.profile.1.name=WPA-PSK
wpasupplicant.device.1.status=disabled
wpasupplicant.device.1.profile=WPA-PSK
wpasupplicant.device.1.driver=madwifi
wpasupplicant.device.1.devname=ath0
wireless.status=enabled
wireless.1.wds.status=enabled
wireless.1.status=enabled
wireless.1.ssid=NOMBRERED
wireless.1.security.type=none
wireless.1.scan_list.status=enabled
wireless.1.scan_list.channels=2462
wireless.1.macclone=disabled
wireless.1.hide_ssid=enabled
wireless.1.devname=ath0
wireless.1.authmode=1
wireless.1.ap=
wireless.1.addmtikie=enabled
users.status=enabled
users.2.status=disabled
users.1.status=enabled
users.1.password=VvpvCwhccFv6Q
users.1.name=ubnt
update.check.status=enabled
telnetd.status=enabled
telnetd.port=23
system.timezone=GMT+3
system.longitude=-58.540955
system.latitude=-34.551453
system.eirp.status=disabled
system.date.timestamp=061700002012
system.date.status=enabled
system.cfg.version=65539
system.button.reset=enabled
syslog.status=enabled
syslog.remote.status=
sshd.status=enabled
sshd.port=22
sshd.auth.passwd=enabled
snmp.status=disabled
route.status=enabled
route.1.status=enabled
route.1.netmask=0
route.1.ip=0.0.0.0
route.1.gateway=192.168.1.1
route.1.devname=br0
resolv.host.1.status=enabled
resolv.host.1.name=BASE
radio.status=enabled
radio.countrycode=840
radio.1.txpower=28
radio.1.subsystemid=0xe012
radio.1.status=enabled
radio.1.reg_obey=enabled
radio.1.rate.mcs=15
radio.1.rate.auto=enabled
radio.1.pollingpri=0
radio.1.pollingnoack=
radio.1.polling=enabled
radio.1.obey=enabled
radio.1.mode=master
radio.1.mcastrate=
radio.1.low_txpower_mode=disabled
radio.1.ieee_mode=11nght40
radio.1.forbiasauto=1
radio.1.dfs.status=enabled
radio.1.devname=ath0
radio.1.cwm.mode=2
radio.1.cwm.enable=0
radio.1.countrycode=840
radio.1.clksel=1
radio.1.chanshift=0
radio.1.chanbw=0
radio.1.antenna.id=4
radio.1.acktimeout=23
radio.1.ackdistance=300
radio.1.ack.auto=enabled
pwdog.status=disabled
ntpclient.status=disabled
netmode=bridge
netconf.status=enabled
netconf.4.up=enabled
netconf.4.status=enabled
netconf.4.promisc=enabled
netconf.4.netmask=255.255.255.0
netconf.4.ip=0.0.0.0
netconf.4.devname=eth1
netconf.3.up=enabled
netconf.3.status=enabled
netconf.3.role=mlan
netconf.3.netmask=255.255.255.0
netconf.3.ip=192.168.1.20
netconf.3.devname=br0
netconf.2.up=enabled
netconf.2.status=enabled
netconf.2.promisc=enabled
netconf.2.netmask=255.255.255.0
netconf.2.ip=0.0.0.0
netconf.2.devname=ath0
netconf.2.allmulti=enabled
netconf.1.up=enabled
netconf.1.status=enabled
netconf.1.promisc=enabled
netconf.1.netmask=255.255.255.0
netconf.1.ip=0.0.0.0
netconf.1.devname=eth0
httpd.status=enabled
httpd.session.timeout=900
httpd.port=80
httpd.https.status=disabled
gui.language=sp_SP
ebtables.sys.status=enabled
ebtables.sys.eap.status=enabled
ebtables.sys.eap.1.status=enabled
ebtables.sys.eap.1.devname=ath0
ebtables.sys.arpnat.status=disabled
ebtables.sys.arpnat.1.status=enabled
ebtables.sys.arpnat.1.devname=ath0
ebtables.status=enabled
dyndns.status=disabled
discovery.status=enabled
discovery.cdp.status=enabled
dhcpd.status=disabled
dhcpd.1.status=disabled
dhcpc.status=disabled
dhcpc.1.status=enabled
dhcpc.1.devname=br0
bridge.status=enabled
bridge.1.port.3.devname=eth1
bridge.1.port.2.devname=ath0
bridge.1.port.1.devname=eth0
bridge.1.fd=1
bridge.1.devname=br0
aaa.status=enabled
aaa.1.wpa.psk=NOMBRERED
airview.tcp_port=18888
radio.1.airsync.status=disabled
radio.1.airsync.mode=
radio.1.airsync.port=
radio.1.airsync.ip=
radio.1.airsync.slot.override=disabled
radio.1.airsync.slot.up=
radio.1.airsync.slot.down=
wireless.1.wmm=enabled
wireless.1.wmmlevel=
radio.1.rts=off
wireless.1.fastframes=0
wireless.1.frameburst=0
wireless.1.compression=0
wireless.1.signal_led_status=enabled
wireless.1.signal_led1=94
wireless.1.signal_led2=80
wireless.1.signal_led3=73
wireless.1.signal_led4=65
radio.1.ampdu.frames=32
radio.1.ampdu.bytes=50000
radio.1.ampdu.status=enabled
gpio.status=enabled
gpio.1.status=enabled
gpio.1.line=8
gpio.1.direction=1
gpio.1.value=disabled
netconf.1.autoneg=enabled
netconf.4.autoneg=enabled
wireless.1.l2_isolation=disabled
radio.1.thresh62a=
radio.1.thresh62b=
radio.1.thresh62g=
wireless.1.sens=0

PAP-NOMBRERED-192.168.1.21-REMOTO.cfg

Código: php

aaa.1.status=disabled
aaa.1.wpa.psk=NOMBRERED
aaa.1.wpa.mode=2
aaa.1.wpa.1.pairwise=CCMP
aaa.1.wpa.key.1.mgmt=WPA-PSK
aaa.1.driver=madwifi
aaa.1.devname=ath0
aaa.1.br.devname=br0
aaa.1.ssid=NOMBRERED
aaa.1.radius.auth.1.status=disabled
aaa.1.radius.acct.1.status=disabled
aaa.1.radius.macacl.status=disabled
aaa.status=disabled
pwdog.period=300
pwdog.delay=300
pwdog.retry=3
pwdog.host=192.168.2.100
pwdog.status=enabled
wireless.1.sens=0
wireless.1.l2_isolation=disabled
wireless.1.signal_led4=65
wireless.1.signal_led3=73
wireless.1.signal_led2=80
wireless.1.signal_led1=94
wireless.1.signal_led_status=enabled
wireless.1.compression=0
wireless.1.frameburst=0
wireless.1.fastframes=0
wireless.1.wmmlevel=
wireless.1.wmm=enabled
wireless.1.addmtikie=enabled
wireless.1.ap=00:15:6D:7C:E7:63
wireless.1.authmode=1
wireless.1.devname=ath0
wireless.1.hide_ssid=disabled
wireless.1.scan_list.channels=2462
wireless.1.scan_list.status=enabled
wireless.1.security.type=none
wireless.1.ssid=La[El Usuario ha Insultado]DelPato
wireless.1.status=enabled
wireless.1.wds.status=enabled
wireless.1.wds.1.peer=
wireless.1.wds.2.peer=
wireless.1.wds.3.peer=
wireless.1.wds.4.peer=
wireless.1.wds.5.peer=
wireless.1.wds.6.peer=
wireless.1.autowds=disabled
wireless.1.mac_acl.status=disabled
wireless.1.mac_acl.policy=allow
wireless.status=enabled
radio.1.thresh62g=
radio.1.thresh62b=
radio.1.thresh62a=
radio.1.ampdu.status=enabled
radio.1.ampdu.bytes=50000
radio.1.ampdu.frames=32
radio.1.rts=off
radio.1.airsync.slot.down=
radio.1.airsync.slot.up=
radio.1.airsync.slot.override=disabled
radio.1.airsync.ip=
radio.1.airsync.port=
radio.1.airsync.mode=
radio.1.airsync.status=disabled
radio.1.ack.auto=enabled
radio.1.ackdistance=300
radio.1.acktimeout=23
radio.1.antenna.id=4
radio.1.chanbw=0
radio.1.chanshift=0
radio.1.clksel=1
radio.1.countrycode=840
radio.1.cwm.enable=0
radio.1.cwm.mode=1
radio.1.devname=ath0
radio.1.dfs.status=enabled
radio.1.forbiasauto=1
radio.1.ieee_mode=11nght40
radio.1.low_txpower_mode=disabled
radio.1.mcastrate=15
radio.1.mode=managed
radio.1.obey=enabled
radio.1.polling=enabled
radio.1.pollingnoack=
radio.1.pollingpri=0
radio.1.rate.auto=enabled
radio.1.rate.mcs=15
radio.1.reg_obey=enabled
radio.1.status=enabled
radio.1.subsystemid=0xe012
radio.1.txpower=28
radio.1.freq=0
radio.1.polling_fh=0
radio.1.polling_fh_time=3000
radio.1.polling_fh_announce_cnt=10
radio.countrycode=840
radio.status=enabled
netconf.status=enabled
netconf.1.status=enabled
netconf.1.devname=eth0
netconf.1.mtu=1500
netconf.1.role=bridge_port
netconf.1.autoip.status=disabled
netconf.1.hwaddr.status=disabled
netconf.1.hwaddr.mac=
netconf.1.autoneg=enabled
netconf.1.ip=0.0.0.0
netconf.1.netmask=255.255.255.0
netconf.1.promisc=enabled
netconf.1.up=enabled
netconf.2.status=enabled
netconf.2.devname=ath0
netconf.2.mtu=1500
netconf.2.role=bridge_port
netconf.2.autoip.status=disabled
netconf.2.hwaddr.status=disabled
netconf.2.hwaddr.mac=
netconf.2.allmulti=enabled
netconf.2.ip=0.0.0.0
netconf.2.netmask=255.255.255.0
netconf.2.promisc=enabled
netconf.2.up=enabled
netconf.3.status=enabled
netconf.3.devname=br0
netconf.3.mtu=1500
netconf.3.role=mlan
netconf.3.autoip.status=disabled
netconf.3.hwaddr.status=disabled
netconf.3.hwaddr.mac=
netconf.3.ip=192.168.1.21
netconf.3.netmask=255.255.255.0
netconf.3.up=enabled
netconf.4.status=enabled
netconf.4.devname=eth1
netconf.4.mtu=1500
netconf.4.role=bridge_port
netconf.4.autoip.status=disabled
netconf.4.hwaddr.status=disabled
netconf.4.hwaddr.mac=
netconf.4.autoneg=enabled
netconf.4.ip=0.0.0.0
netconf.4.netmask=255.255.255.0
netconf.4.promisc=enabled
netconf.4.up=enabled
gpio.1.value=disabled
gpio.1.direction=1
gpio.1.line=8
gpio.1.status=enabled
gpio.status=enabled
airview.tcp_port=18888
bridge.status=enabled
bridge.1.status=enabled
bridge.1.devname=br0
bridge.1.stp.status=disabled
bridge.1.port.1.status=enabled
bridge.1.port.1.devname=eth0
bridge.1.port.2.status=enabled
bridge.1.port.2.devname=ath0
bridge.1.port.3.status=enabled
bridge.1.port.3.devname=eth1
bridge.1.fd=1
dhcpc.status=disabled
dhcpc.1.devname=br0
dhcpc.1.status=disabled
dhcpd.status=disabled
discovery.cdp.status=enabled
discovery.status=enabled
dyndns.status=disabled
ebtables.status=enabled
ebtables.sys.arpnat.1.devname=ath0
ebtables.sys.arpnat.1.status=enabled
ebtables.sys.arpnat.status=disabled
ebtables.sys.eap.1.devname=ath0
ebtables.sys.eap.1.status=enabled
ebtables.sys.eap.status=enabled
ebtables.sys.status=enabled
gui.language=sp_SP
httpd.https.status=disabled
httpd.port=80
httpd.session.timeout=900
httpd.status=enabled
netmode=bridge
ntpclient.status=disabled
resolv.status=disabled
resolv.host.1.name=REMOTO
resolv.host.1.status=enabled
resolv.nameserver.1.ip=
resolv.nameserver.1.status=disabled
resolv.nameserver.2.ip=
resolv.nameserver.2.status=disabled
resolv.nameserver.status=enabled
route.status=enabled
route.1.ip=0.0.0.0
route.1.netmask=0
route.1.gateway=192.168.1.1
route.1.comment=
route.1.status=enabled
route.1.devname=br0
snmp.status=disabled
sshd.auth.passwd=enabled
sshd.port=22
sshd.status=enabled
syslog.remote.status=
syslog.status=enabled
system.button.reset=enabled
system.cfg.version=65539
system.date.status=enabled
system.date.timestamp=061700002012
system.eirp.status=disabled
system.latitude=
system.longitude=
system.timezone=GMT+3
telnetd.port=23
telnetd.status=enabled
update.check.status=enabled
users.1.name=ubnt
users.1.password=VvpvCwhccFv6Q
users.1.status=enabled
users.2.status=disabled
users.status=enabled
wpasupplicant.device.1.devname=ath0
wpasupplicant.device.1.driver=madwifi
wpasupplicant.device.1.profile=WPA-PSK
wpasupplicant.device.1.status=enabled
wpasupplicant.profile.1.name=WPA-PSK
wpasupplicant.profile.1.network.1.bssid=00:15:6D:7C:E7:63
wpasupplicant.profile.1.network.1.eap.1.status=disabled
wpasupplicant.profile.1.network.1.key_mgmt.1.name=WPA-PSK
wpasupplicant.profile.1.network.1.pairwise.1.name=CCMP
wpasupplicant.profile.1.network.1.proto.1.name=RSN
wpasupplicant.profile.1.network.1.psk=NOMBRERED
wpasupplicant.profile.1.network.1.ssid=NOMBRERED
wpasupplicant.status=enabled
ppp.status=disabled
vlan.status=disabled

DATOS:
RED: NOMBRERED
PASS: NOMBRERED

[D3M0N]

Enlaces Punto a Punto con Equipamiento Ubiquiti:

Ubiquiti Nano Loco M2/M5: 3Km
Ubiquiti Nanostation M2/M5: 7Km
Ubiquiti NanoBridge M2/M5: 15Km
Ubiquiti AirGrid M2/M5: 30Km